Donor Ability of Bisphosphinemonoxide Ligands Relevant to Late-Metal Olefin Polymerization Catalysis.

Late-transition-metal catalysts for polymerization of olefins have drawn a significant amount of attention owing to their ability to tolerate and incorporate polar comonomers. However, a systematic way to experimentally quantify the electronic properties of the ligands used in these systems has not been developed. Quantified ligand parameters will allow for the rational design of tailored polymerization catalysts, which would target specific polymer properties. We report a series of platinum complexes bearing bisphosphinemonoxide ligands, which resemble those used in the polymerization catalysts of Nozaki and Chen. Their electronic properties are investigated experimentally, and trends are rationalized by using computed spectral properties. Benchmarking computational data with known experimental parameters further enhances the utility of both methods for determining optimal ligands for catalytic application.

Surfactant-mediated electrodeposition of a water-oxidizing manganese oxide.

Splitting water into hydrogen and oxygen is one of the most promising ways of storing energy from intermittent, renewable sources in the future. Toward this goal, development of inexpensive, stable, and non-toxic catalysts for water oxidation is crucial. We report that the electrodeposition of manganese oxide in the presence of sodium dodecyl sulfate (SDS) produces a material that is highly active for electrocatalytic water oxidation at pH near 7 and remains stable for over 24 hours of sustained electrolysis. Clark electrode measurements demonstrate more than 95% Faradaic efficiency for oxygen evolution after an initial charging period. We found that catalytic performance was optimized in films prepared by electrodeposition using a precursor solution containing moderate concentration of substrates, namely 25 mM Mn(2+) and 25 mM SDS. Microstructure and elemental analyses revealed that the deposited material, a mixed-phase manganese oxide, is structurally similar to materials used for electrochemical capacitors and batteries, drawing a parallel between highly studied cathode materials for rechargeable batteries and heterogeneous catalysts for water oxidation.

Photosynthetic water oxidation: insights from manganese model chemistry.

Catalysts for light-driven water oxidation are a critical component for development of solar fuels technology. The multielectron redox chemistry required for this process has been successfully deployed on a global scale in natural photosynthesis by green plants and cyanobacteria using photosystem II (PSII). PSII employs a conserved, cuboidal Mn4CaOX cluster called the O2-evolving complex (OEC) that offers inspiration for artificial O2-evolution catalysts. In this Account, we describe our work on manganese model chemistry relevant to PSII, particularly the functional model [Mn(III/IV)2(terpy)2(µ-O)2(OH2)2](NO3)3 complex (terpy = 2,2';6',2″-terpyridine), a mixed-valent di-µ-oxo Mn dimer with two terminal aqua ligands. In the presence of oxo-donor oxidants such as HSO5(-), this complex evolves O2 by two pathways, one of which incorporates solvent water in an O-O bond-forming reaction. Deactivation pathways of this catalyst include comproportionation to form an inactive Mn(IV)Mn(IV) dimer and also degradation to MnO2, a consequence of ligand loss when the oxidation state of the complex is reduced to labile Mn(II) upon release of O2. The catalyst's versatility has been shown by its continued catalytic activity after direct binding to the semiconductor titanium dioxide. In addition, after binding to the surface of TiO2 via a chromophoric linker, the catalyst can be oxidized by a photoinduced electron-transfer mechanism, mimicking the natural PSII process. Model oxomanganese complexes have also aided in interpreting biophysical and computational studies on PSII. In particular, the µ-oxo exchange rates of the Mn-terpy dimer have been instrumental in establishing that the time scale for µ-oxo exchange of high-valent oxomanganese complexes with terminal water ligands is slower than O2 evolution in the natural photosynthetic system. Furthermore, computational studies on the Mn-terpy dimer and the OEC point to similar Mn(IV)-oxyl intermediates in the O-O bond-forming mechanism. Comparison between the OEC and the Mn-terpy dimer indicates that challenges remain in the development of synthetic Mn water-oxidation catalysts. These include redox leveling to couple multielectron reactions with one-electron steps, avoiding labile Mn(II) species during the catalytic cycle, and protecting the catalyst active site from undesired side reactions. As the first example of a functional manganese O2-evolution catalyst, the Mn-terpy dimer exemplifies the interrelatedness of biomimetic chemistry with biophysical studies. The design of functional model complexes enriches the study of the natural photosynthetic system, while biology continues to provide inspiration for artificial photosynthetic technologies to meet global energy demand.

Photoelectrochemical hole injection revealed in polyoxotitanate nanocrystals functionalized with organic adsorbates.

We find that crystallographically resolved Ti17O24(OPr(i))20 nanoparticles, functionalized by covalent attachment of 4-nitrophenyl-acetylacetonate or coumarin 343 adsorbates, exhibit hole injection into surface states when photoexcited with visible light (λ = 400-680 nm). Our findings are supported by photoelectrochemical measurements, EPR spectroscopy, and quantum dynamics simulations of interfacial charge transfer. The underlying mechanism is consistent with measurements of photocathodic currents generated with visible light for thin layers of functionalized polyoxotitanate nanocrystals deposited on FTO working electrodes. The reported experimental and theoretical analysis demonstrates for the first time the feasibility of p-type sensitization of TiO2 solely based on covalent binding of organic adsorbates.

Linker rectifiers for covalent attachment of transition-metal catalysts to metal-oxide surfaces.

Linkers that favor rectification of interfacial electron transfer are likely to be required for efficient photo-driven catalysis of multi-electron reactions at electrode surfaces. Design principles are discussed, together with the synthesis and characterization of a specific pair of molecular linkers, related by inversion of the direction of an amide bond in the heart of the molecule. The linkers have a terpyridyl group that can covalently bind Mn as in a well-known water oxidation catalyst and an acetylacetonate group that allows attachment to TiO2 surfaces. The appropriate choice of the sense of the amide linkage yields directionality of interfacial electron transfer, essential to enhance electron injection and slow back-electron transfer. Support comes from electron paramagnetic resonance and terahertz spectroscopic measurements, as well as computational modeling characterizing the asymmetry of electron transfer properties.

An anionic N-donor ligand promotes manganese-catalyzed water oxidation.

Four manganese complexes of pentadentate ligands have been studied for their ability to act as oxygen evolution catalysts in the presence of Oxone or hydrogen peroxide. The complexes [Mn(PaPy3)(NO3)](ClO4) (1) (PaPy3H = N,N-bis(2-pyridylmethyl)-amine-N-ethyl-2-pyridine-2-carboxamide) and [Mn(PaPy3)(µ-O)(PaPy3)Mn](ClO4)2 (2) feature an anionic carboxamido ligand trans to the labile sixth coordination site, while [Mn(N4Py)OTf](OTf) (3) (N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) and [Mn(PY5)(OH2)](ClO4)2 (4) (PY5 = 2,6-bis(bis(2-pyridyl)methoxymethane)-pyridine) have neutral ligands of varying flexibility. 1 and 2 are shown to evolve oxygen in the presence of either Oxone or hydrogen peroxide, but 3 evolves oxygen only in the presence of hydrogen peroxide. 4 is inactive. The activity of 1 and 2 with Oxone suggests that the presence of an anionic N-donor ligand plays a role in stabilizing putative high-valent intermediates. Anionic N-donor ligands may be viewed as alternatives to µ-oxo ligands that are prone to protonation in low-valent Mn species formed during a catalytic cycle, resulting in loss of catalyst structure.

Interfacial electron transfer into functionalized crystalline polyoxotitanate nanoclusters.

Interfacial electron transfer (IET) between a chromophore and a semiconductor nanoparticle is one of the key processes in a dye-sensitized solar cell. Theoretical simulations of the electron transfer in polyoxotitanate nanoclusters Ti(17)O(24)(OPr(i))(20) (Ti(17)) functionalized with four p-nitrophenyl acetylacetone (NPA-H) adsorbates, of which the atomic structure has been fully established by X-ray diffraction measurements, are presented. Complementary experimental information showing IET has been obtained by EPR spectroscopy. Evolution of the time-dependent photoexcited electron during the initial 5 fs after instantaneous excitation to the NPA LUMO + 1 has been evaluated. Evidence for delocalization of the excitation over multiple chromophores after excitation to the NPA LUMO + 2 state on a 15 fs time scale is also obtained. While chromophores are generally considered electronically isolated with respect to neighboring sensitizers, our calculations show that this is not necessarily the case. The present work is the most comprehensive study to date of a sensitized semiconductor nanoparticle in which the structure of the surface and the mode of molecular adsorption are precisely defined.

Light-driven water oxidation for solar fuels.

Light-driven water oxidation is an essential step for conversion of sunlight into storable chemical fuels. Fujishima and Honda reported the first example of photoelectrochemical water oxidation in 1972. In their system, TiO2 was irradiated with ultraviolet light, producing oxygen at the anode and hydrogen at a platinum cathode. Inspired by this system, more recent work has focused on functionalizing nanoporous TiO2 or other semiconductor surfaces with molecular adsorbates, including chromophores and catalysts that absorb visible light and generate electricity (i.e., dye-sensitized solar cells) or trigger water oxidation at low overpotentials (i.e., photocatalytic cells). The physics involved in harnessing multiple photochemical events for multielectron reactions, as required in the four-electron water oxidation process, has been the subject of much experimental and computational study. In spite of significant advances with regard to individual components, the development of highly efficient photocatalytic cells for solar water splitting remains an outstanding challenge. This article reviews recent progress in the field with emphasis on water-oxidation photoanodes inspired by the design of functionalized thin film semiconductors of typical dye-sensitized solar cells.

Photocatalytic Water Oxidation Using Manganese Compounds Immobilized in Nafion Polymer Membranes.

Robust water oxidation catalysts using earth abundant metals are required as part of an overall scheme to convert sunlight into fuels. Here, we report the immobilization of [[Formula: see text]O(5)(terpy)(4)(H(2)O)(2)](ClO(4))(6) (terpy = 2,2';6',2″-terpyridine), [Mn(4)O(6)(tacn)(4)](ClO(4))(4) (tacn = 1,4,7-triazacyclononane), and manganese dioxide nanoparticles in Nafion on fluorine-doped tin oxide conducting glass electrodes. The electrodes are illuminated with white light in the presence of an applied potential and the resulting photocurrent is assigned to the oxidation of solvent water. Photodecomposition of the tetrameric complexes results in a material that is more active for light-driven electrooxidation of water. The reactivity, wavelength dependence, and stability of the compounds in Nafion under illumination are discussed.